Available on Android and iPadOS version only
Monitor Mode (No Camera Control):
- Connect your UVC/Capture Card to the phone with proper cable
- Now device name should be appeared on the screen, if not, please check if your device is compatible with your phone
- Click Enter
- Your phone may pop up an prompt window asking for allowing Monitor+ to connect to the USB device, click Allow
Duplex Mode (Monitor + Remote Control)
- Connect to your camera using wired or wireless connection method, until the camera model name appears on the screen
- Connect your UVC/Capture Card to the phone with proper cable
- Make sure both camera model name and UVC/Capture Card name are appears on the screen
- Once these conditions are met, the Enter in Duplex Mode button should appear, press the button
- Your phone may pop up an prompt window asking for allowing Monitor+ to connect to the USB device, click Allow
FAQs
- What kinds of devices are supported?
- UVC compatible device that capable of capturing NV12 or YUYV or MJPEG color format
- What resolutions and frame rates can be supported?
- Depends on the specs of the capture card you are using and the performance of your phone. Noted that when setting YUYV or NV12 format, it is necessary to determine whether the USB bandwidth of the mobile phone is sufficient. For example: a USB3.0 capture card that supports capturing 1080p 60fps YUYV format, but the USB controller chip of the mobile phone is USB2.0, which will not be able to obtain a smooth picture.